разбор строки в массив php
str_split
str_split — Преобразует строку в массив
Описание
Преобразует строку в массив.
Список параметров
Максимальная длина фрагмента.
Возвращаемые значения
Примеры
Пример #1 Пример использования str_split()
Результат выполнения данного примера:
Примечания
Функция str_split() производит разбивку по байтам, а не по символам, в случае использования строк в многобайтных кодировках.
Смотрите также
User Contributed Notes 40 notes
A proper unicode string split;
print_r(str_split($s, 3));
print_r(str_split_unicode($s, 3));
A new version of «str_split_unicode» prev.
heres my version for php4 and below
The manual don’t says what is returned when you parse a different type of variable.
This is the example:
= «Long» ; // More than 1 char
$str2 = «x» ; // Only 1 char
$str3 = «» ; // Empty String
$str4 = 34 ; // Integer
$str5 = 3.4 ; // Float
$str6 = true ; // Bool
$str7 = null ; // Null
I noticed in the post below me that his function would return an array with an empty key at the end.
So here is just a little fix for it.
I needed a function that could split a string from the end with any left over chunk being at the beginning of the array (the beginning of the string).
The documentation fails to mention what happens when the string length does not divide evenly with the chunk size. Not sure if the same behavior for all versions of PHP so I offer the following code to determine this for your installation. On mine [version 5.2.17], the last chunk is an array the length of the remaining chars.
The very handy str_split() was introduced in PHP 5, but a lot of us are still forced to use PHP 4 at our host servers. And I am sure a lot of beginners have looked or are looking for a function to accomplish what str_split() does.
Taking advantge of the fact that strings are ‘arrays’ I wrote this tiny but useful e-mail cloaker in PHP, which guarantees functionality even if JavaScript is disabled in the client’s browser. Watch how I make up for the lack of str_split() in PHP 4.3.10.
// The result is an email address in HTML entities which, I hope most email address harvesters can’t read.
>
print cloakEmail ( ‘someone@nokikon.com’ );
?>
###### THE CODE ABOVE WITHOUT COMMENTS ######
It’s mentioned in the Return Values section above («If the split_length length exceeds the length of string, the entire string is returned as the first (and only) array element»), but note that an input of empty string will return array(1) < [0]=>string(0) «» >. Interestingly an input of NULL will also return array(1) < [0]=>string(0) «» >.
revised function from tatsudoshi
The previous suggestion is almost correct (and will only working for strlen=1. The working PHP4 function is:
Even shorter version:
//place each character (or group of) of the
string into and array
the fastast way (that fits my needs) to replace str_split() in php 4 i found is this:
PHP: конвертирование массива в строку
В этой статье разберем как преобразовывать массив в строку и обратно.
Есть два способа преобразовать массив в строку в PHP.
Использование функции implode()
Используя функцию implode(), мы можем преобразовать все элементы массива в строку. Параметр разделителя в функции implode() является необязательным. Но хорошей практикой будет использовать оба аргумента.
В приведенном выше примере в первой строке объявлена переменная массива и ей присвоены некоторые значения.
Вы также можете преобразовать полученную строку если требуется обратно в массив. Для этого мы можем использовать функцию PHP explode().
Функция explode()
Используя функцию explode(), мы можем преобразовать строку в элементы массива. Мы можем передать три аргумента. Первый разделитель, второй массив и последний лимит (ограничение длинны).
В приведенном выше примере строковой переменной присваивается некоторое значение. Затем функция explode() разбивает эту строку на массив. После этого мы использовали функцию print_r(), которая печатает все элементы массива и его индексы.
Использование функции json()
В PHP объекты могут быть преобразованы в строку JSON с помощью функции json_encode().
В приведенном выше примере мы присвоили значение переменной объекта, а затем в json_encode() преобразовали значение в переменную массива и создали ассоциативный массив.
parse_str
(PHP 4, PHP 5, PHP 7, PHP 8)
parse_str — Разбирает строку в переменные
Описание
Список параметров
Использовать эту функцию без параметра result крайне НЕ РЕКОМЕНДУЕТСЯ. Подобное использование объявлено УСТАРЕВШИМ с PHP 7.2.
Возвращаемые значения
Функция не возвращает значения после выполнения.
Список изменений
Примеры
Пример #1 Использование parse_str()
Пример #2 Соотношение имён parse_str()
Примечания
Смотрите также
User Contributed Notes 31 notes
It bears mentioning that the parse_str builtin does NOT process a query string in the CGI standard way, when it comes to duplicate fields. If multiple fields of the same name exist in a query string, every other web processing language would read them into an array, but PHP silently overwrites them:
# silently fails to handle multiple values
parse_str ( ‘foo=1&foo=2&foo=3’ );
# the above produces:
$foo = array( ‘foo’ => ‘3’ );
?>
Instead, PHP uses a non-standards compliant practice of including brackets in fieldnames to achieve the same effect.
# bizarre php-specific behavior
parse_str ( ‘foo[]=1&foo[]=2&foo[]=3’ );
if you need custom arg separator, you can use this function. it returns parsed query as associative array.
You may want to parse the query string into an array.
As of PHP 5, you can do the exact opposite with http_build_query(). Just remember to use the optional array output parameter.
This is a very useful combination if you want to re-use a search string url, but also slightly modify it:
Results in:
url1: action=search&interest[]=sports&interest[]=music&sort=id
url2: action=search&interest[0]=sports&interest[1]=music&sort=interest
(Array indexes are automatically created.)
CONVERT ANY FORMATTED STRING INTO VARIABLES
I developed a online payment solution for credit cards using a merchant, and this merchant returns me an answer of the state of the transaction like this:
to have all that data into variables could be fine for me! so i use str_replace(), the problem is this function recognizes each group of variables with the & character. and i have comma separated values. so i replace comma with &
Note that the characters «.» and » » (empty space) will be converted to «_». The characters «[» and «]» have special meaning: They represent arrays but there seems to be some weird behaviour, which I don’t really understand:
Here is a little function that does the opposite of the parse_str function. It will take an array and build a query string from it.
?>
Note that the function will also append the session ID to the query string if it needs to be.
The array to be populated does not need to be defined before calling the function: