easydent4 simple viewer что это за программа
VATECH
SMART SOLUTION FOR YOUR DENTAL PRACTICE
SMART SOLUTION FOR YOUR DENTAL PRACTICE
With EasyDent’s user-friendly interface, dental imaging would be easy and effective.
With the ability to synchronize all your VATECH equipment, and 3rd party software, EasyDent gives you the flexibility that you need in the fast-paced digital dentistry.
SMART S/W FOR YOUR IMAGES
With EasyDent, you can handle and manage all images acquiring, saving, organizing, retrieving, printing, and showing — taken from intra and extra-oral equipment in a smart way.
USEFUL TOOLS FOR 2D DIAGNOSTICS
Multiple diagnostic tools including the magnifier LE, drawing, measuring etc. improve the quality of clinical diagnosis comprehensively.
FMX(Full Mouth X-ray) MODE
With EasyDent, you can easily take the full mouth images and get very detailed look at each tooth. Customizing the layouts and image acquisition order is allowed.
Including FMX mode, EasyDent provides multiple image views, layouts for effective consultation.
Almost all types of dental images could be displayed in one window.
IMPLANT SIMULATION
The simulation function for implant treatment is very helpful for treatment planning and consultation.
3 простых шага по исправлению ошибок EASYDENT4.EXE
В вашей системе запущено много процессов, которые потребляют ресурсы процессора и памяти. Некоторые из этих процессов, кажется, являются вредоносными файлами, атакующими ваш компьютер.
Чтобы исправить критические ошибки easydent4.exe,скачайте программу Asmwsoft PC Optimizer и установите ее на своем компьютере
1- Очистите мусорные файлы, чтобы исправить easydent4.exe, которое перестало работать из-за ошибки.
2- Очистите реестр, чтобы исправить easydent4.exe, которое перестало работать из-за ошибки.
3- Настройка Windows для исправления критических ошибок easydent4.exe:
Всего голосов ( 182 ), 116 говорят, что не будут удалять, а 66 говорят, что удалят его с компьютера.
Как вы поступите с файлом easydent4.exe?
Некоторые сообщения об ошибках, которые вы можете получить в связи с easydent4.exe файлом
(easydent4.exe) столкнулся с проблемой и должен быть закрыт. Просим прощения за неудобство.
(easydent4.exe) перестал работать.
easydent4.exe. Эта программа не отвечает.
(easydent4.exe) — Ошибка приложения: the instruction at 0xXXXXXX referenced memory error, the memory could not be read. Нажмитие OK, чтобы завершить программу.
(easydent4.exe) не является ошибкой действительного windows-приложения.
(easydent4.exe) отсутствует или не обнаружен.
EASYDENT4.EXE
Проверьте процессы, запущенные на вашем ПК, используя базу данных онлайн-безопасности. Можно использовать любой тип сканирования для проверки вашего ПК на вирусы, трояны, шпионские и другие вредоносные программы.
процессов:
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
How to convert Easydent4 to EzDent-i: Conversion guide for IT Consultant
Written on Aug 9, 2019
It is highly recommended that this guide be used only by qualified IT Consultants to convert legacy Easydent4 database to EzDent-i. All proper backups must be made in advance of conversion process. Vatech America holds no liabilty in the event of failure to follow recomendations or proper adhearence to conversion process steps.
PDF Guide can be downloaded from the following link: EasyDent4 Conversion Guide for IT Consultant
WARNING: Before proceeding, please verify that you have a proper, working backup.
If no backup is made in advance please follow these guides on DB Back Up for your Software System:
Things to check first:
Installation of EZServer
Please install EzServer on to the PC you want the EzDent-I DB to reside on.
You may find the download link for EzServer, ConsultData, and ImplantData here:
To determine the version of EZServer:
-Right click on the VTFilemanager and click ‘About’
Once you have verified the version, compare with the following chart to confirm which version tool to use.
The Migration tool is placed on the source PC with the target DB to be migrated.
Migration tool:
1st: Migration tool can be found in the following link:
2nd: Extract the Migration tool zip folder and Navigate to the Bin folder in the VTMigrator folder:
And run the VTMigration.exe to start and the Analysis screen will open:
NOTE: If you get a failed to run error as shown- install EzServer locally as it will allow the migrator to run* this only occurs in some limited cases.
You may need to change the port number to match installation of EzServer.
All versions migrating should use the Default:55001 unless changed, even for version 3.0.7 which uesse 55005 as its communication port*
It is recommended to keep these files as a backup.
Data Range: Range is an option for you to migrate data from a certain period only. Select this option to migrate data of a certain period. Deselect the option to migrate entire data.
Note: To migrate all database entries do not select a date range.
Click Analyse to identify any redundant patients or any other conflicts.
-If two of more patients are using the same chart number, a popup window will open.
Ignore: Ignores redundant patients and proceed with migration.
Abort: Stops migration.
Open Report: Displays a report of redundant patients and other conflicts.
Once the report is done, you will get a pop up message. Click Yes to continue:
You will then get to the next step of the migration process:
Please review the Analyse Report to see which charts did not be migrated over and why.
You will need to manually import/migrate which ever charts that have conflicts.
4th: Once you are ready please press Start.
Please refer to the Appendix for more information found on the window above.
5th: When the migration is complete, you will get a Migration Report.
The number of migrated patients of the result report represents the number of patients whose data was successfully migrated.
The report can be found in the Report folder as “Report[Migration Date].txt”
For any failed files, you may try the Retry Failed Files button to try and migrate that data over. The report will give you the reason for the failure and you may need to manual import the Chart and files over to EzDent-I, if possible. You will now manual upload any patient charts that did not migrate over. You will also need to install the ConsultData and ImplantData (If needed) on the PC where the EzServer was installed. Crown data added to an image are not migrated. Only implant data that matches EzDent-I’s implant database are displayed on the screen. User account data in Easydent4 is not migrated. Report files are not migrated. Patient treatment data are not migrated. The images to which Gamma values are applied are not migrated. If in Easydent4 DB there are two or more patients with the same chart number, you can skip that part only and proceed or stop the entire migration as it conflicts and won’t migrate. Images that were imported, deleted will not be migrated over.
In the event CT images do not convert verify the Version of Easydent4 by Opening Easydent4 and clicking Help, About. Version 4.1.5.9, if the version is not at least 4.1.5.9 or newer you will need to update the version and rerun the conversion tool.
Note: Saved Reports will not migrate over as they are not compatible.
Source Info: Source environment analysis info
Patient Count: Total number of patients for migration (duplicate patients are excluded)
File Path (or IP): Source file path for migration
Fie Count: Total number of images for migration
Valid File Count: Number of valid image files
Invalid File Count: Number of invalid image files
Total Valid File Size: Total size of valid image files
Require Space: Required space for files
Target Info: Target environment analysis information
File Path (or IP): Target file path for migration
Free Space: Available disk space
Analysis Report button: Display the detailed report information of the analysis stage
Reset button: Return to the analysis setup stage
Start button: Execute migration
Manually Migrating Patient Files That Failed
For any failed files, you may try the Retry Failed Files button to try and migrate that data over. You may need to try it multiple times.
For any patient charts and images that did not migrate over from Easydent 4, you can manually export them and then import them into EzDent-I.
Exporting from Easydent 4
For 2D images such as Panoramas, Cephalo, and IntraOral: In Easydent 4, you will need to export them one by one.
-Open up the first 2D image in the viewer in Easydent4.
Then click File, and go to where it says Save As and select it.
Easydent4 will then prompt you to save the scan to a directory on your PC. We suggest to place everything in a folders categorized with the patients’ name on the desktop so that it will be easier to find later on when we go to import the files into EzDent-I.
Panos will be exported as Bitmap files (.bmp)
For 3D CBCT scans: In Easydent 4, you need to click on the thumbnail of the CT you wish to export.
Then click File, and go to where it says CT Save As… and a secondary menu with pop up to the right. Select ZIP to start exporting.
CT scans are exported as zipped files.
Follow these steps for the rest of the CBCT scans that need to be manually exported.
Importing into EzDent-I
You will need to create the patient’s chart in EzDent-I with the same exact patient info. (Name, DOB, Chart Number, Etc.)
Start by clicking on the patient icon with the plus (+) sign, as marked below.
Fill out the information on the pop up window. The required information are: NAME, DOB, CHART NUMBER, and GENDER.
Note: This will be the only time you can enter the Chart Number and it cannot be edited later.
Once you are finished, click Add.
Next click the ACQUISITION tab at the top of EzDent-I to switch to the next window.
Click Import on the left side and select the Modality of the scan you are importing, i.g. Panorama, CT, Cephalo, etc.
After importing the correct scan, click Save to DB.
Continue these steps until you have finished with all the patients/images you need.
You will need to unzip the CT scans before you can import them. Can also adjust the date of the scan during import to match the original acquisition date and time.
Written on Sep 10, 2018
Operating System Compatibility Easydent4
Due to Easydent4 utilizing Microsoft MSSQL server the following listing has been created to guide your Certified IT consultant in advance of any upgrade. Before installing or moving existing Database Backup Document should be reviewed, having final backup created just in advance.
Server Compatibility:
Workstations:
The following Operating systems have been identified to operate as workstation type ‘viewing’ PC’s, typically chair side, operatory, and other workstation type.
*On Screen Keyboard may not work, however all other general functions working normally. Requires ‘Run as Admin’ on all Executables.
NOTICE: Vatech is not able to guarantee any upgrade to any windows platform other than ‘as delivered by manufacture’ due to changes or updates to Windows* by Microsoft with out notice at any given time due to changes out side of manufacture control.
Any upgrade or Update windows platform should be carefully managed by Certified IT Consultant in accordance with Manufacture specifications and suggestions. Failure to comply or deviation might cause potential stability issues or undesired failures.
Always retain Original Capture PC and Hard Drive in its entirety in case of upgrade failure to reversion of the system and retention.
In some cases limited functionality might occur, such as twain, direct integration and other such which was originally designed to operate in the previous platform. In those cases we are unable to provide functionality.
Once the upgrade or update is completed, It is strongly advised that any upgrade a certified IT professional creates a ‘clone’ copy of the working hard drive in case of failure due to such updates or changes out side of our control.
EasyDent4 On Screen Keyboard «OSK» not working in Windows10
Written on Jul 12, 2016
Due to changes in Windows 10 certain features of the software such as the «OSK» or ON screen Keyboard function with in the search might not work on Windows 10; we recommend adding the following compatibility option to overcome this issue. In some cases this might not work due to OS build out; updates; patches and things with in Windows in general.
You need to do the following in oder to resolve on screen keyboard issue.
Run as Windows 7 on the following executable which can be found in the path:
Right click on the icon > properties > compatibility tab > check the box “ Run this program in compatibility mode for >scroll down to select Windows 7 > click on apply.
Notice: Please note that Easydent4 is not supported on Windows 10 however the software will work in general with some limited functionality issue as mentioned that is out of our control, and unsupported.
If the above mentioned steps do not resolve the issue; there is a specific compatibility issue with in the build out of the Operating system that we will not be able to work around. We advise if further usage of the software is required; searching by the Image capture «Search by date button» might need to be used instead or some sort of linkage, integration or bridging software such as DataGrabber where available.